Castrev Models
← The Collector's Garage

Display and dust your model cars with care.

A good display makes a collection enjoyable to look at and easier to care for. Start by keeping dust away, then use a light touch when a model needs attention.

Castrev Models · November 2026 · Collection care

Give each model a stable place

Choose a shelf or cabinet that is level and secure, away from direct sunlight, heat sources and places where it might be knocked. A closed cabinet or individual display case can reduce dust, so the cars need less handling. Allow enough room around mirrors, antennas and spoilers to lift each model without catching another.

Keep the display in a room with reasonably stable conditions. Plastics, rubber, paints and adhesives can respond differently to light, heat and changes in humidity; there is no single guaranteed setting for every mixed-material model. Check your collection periodically for changes, including sticky surfaces, lifted decals or cracks. The Canadian Conservation Institute's guidance on plastics and rubber explains why reducing light and pollutants matters.

Inspect before you clean

Look closely under good light. If paint is lifting, a decal is loose, a part is wobbly, or a surface feels sticky or powdery, stop. Even a soft brush can catch a fragile detail. For valuable or deteriorating models, consult a qualified conservator and follow the maker's care instructions.

Set a clean, uncluttered workspace with a soft, stable surface. Support the model from its base or strongest structural areas with both hands; avoid lifting by wheels, spoilers, mirrors or antennas. The Canadian Conservation Institute recommends planning a safe route and supporting fragile objects during handling.

Remove loose dust gently

  1. Use a clean, dry, very soft model or artist's brush kept for this job. A purpose-made model cleaning brush is one option.
  2. Start on a stable, unobtrusive area. With the lightest pressure, lift loose dust away from the surface. Work around delicate parts, not across them, and stop if fibres snag or a finish moves.
  3. Check the brush often. If it is dirty, replace or clean and fully dry it before continuing. Return the model to its case only when the display surface is clean and dry.

These steps are for loose dust on a sound surface. Do not assume alcohol, household cleaners, polish, compressed air or water are safe on every paint, decal, adhesive or plastic. For stubborn dirt or an uncertain finish, stop and ask the manufacturer or a conservator before trying a treatment. Conservation guidance notes that cleaning plastics can itself cause damage, so prevention is the better first step.

Keep the collection easy to manage

Arrange by a theme that helps you enjoy the cars: scale, maker, racing series, era or colour. Leave space for labels and for safe removal. Photograph each model and record its maker, scale, product number, condition and location; keep boxes and small parts labelled so they can be reunited later. Revisit the display periodically instead of cleaning on a fixed schedule: a protected model may need no intervention.

Further reading

More from The Collector's Garage →